Nothing Displaying of Monitor

[MRDEATH[GoD]Gen]

CPU???? Did you change the cpu..You can and I have,put in a cpu and bent a pin.If you have a bent pin,the pc will run,but nothing shows up on the monitor.

[mapes]

Tony

I'm thinking you should pull all the cards out of the MB. Then undo the mounting hardware on the MB. Double check nothing is shorting out the MB. Like a screw trapped on the under side of the MB. Carefully rescrew in the MB. Then with nothing attached except the vid card,proc ram and PSU power on the unit. Do not attach usb devicces or hardrives or optical drives. Give that a try. when remounting the MB make sure it's not getting flexed in a a bad way.