Announcement

Collapse
No announcement yet.

Wireless band questions.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Wireless band questions.

    A few months ago I bought a DGL-4500. It has both 2.4 Ghz and 5 Ghz frequency settings. It is now set at 2.4 Ghz because I had trouble getting my laptop to connect when it was set at 5 Ghz. I assume that I would need a new wireless card and the my I touch would not work with the 5Ghz band. Is this the case?

    The reason I'm asking this is because the signal is not getting upstairs too well and I was thinking that I could get a better one with the 5ghz band. What else can I do to ensure a better signal up there if the 5Ghz band wont work?

    TIA
    [img]https://farm5.staticflickr.com/4373/35734799443_53cb20ef13_z.jpg[/img]


    Killed by CLRs since 2004. WOOT!
    Support Cainslair. Donate here! [url]http://www.cainslair.org/billspaypal.php?[/url]

    #2
    You could use a range extender. Or depending on the quality of your house wiring you could try Homeplugs.

    Comment


      #3
      For the 5 Ghz are you running A or N?

      Comment


        #4
        Originally posted by mapes View Post
        For the 5 Ghz are you running A or N?
        I'm not sure, I think my laptop has N.
        [img]https://farm5.staticflickr.com/4373/35734799443_53cb20ef13_z.jpg[/img]


        Killed by CLRs since 2004. WOOT!
        Support Cainslair. Donate here! [url]http://www.cainslair.org/billspaypal.php?[/url]

        Comment


          #5
          I have 802.11 a/b/g/Draft-N
          [img]https://farm5.staticflickr.com/4373/35734799443_53cb20ef13_z.jpg[/img]


          Killed by CLRs since 2004. WOOT!
          Support Cainslair. Donate here! [url]http://www.cainslair.org/billspaypal.php?[/url]

          Comment


            #6
            Originally posted by Duke{CLR} View Post
            I have 802.11 a/b/g/Draft-N
            the Draft-N say's it was released with N support before the N spec was finalized. Two options. Try to implicitly to set A (54MB) on both Lappy and AP. Or see if there is a updated firmware for the router. Heck I'm not even certain if the N spec has been ratified. Look on wikipedia on 802.11n for more info

            Comment


              #7
              Originally posted by mapes View Post
              the Draft-N say's it was released with N support before the N spec was finalized. Two options. Try to implicitly to set A (54MB) on both Lappy and AP. Or see if there is a updated firmware for the router. Heck I'm not even certain if the N spec has been ratified. Look on wikipedia on 802.11n for more info
              I'll give that a try next week when I return home form the trip I start tomorrow. Thanks
              [img]https://farm5.staticflickr.com/4373/35734799443_53cb20ef13_z.jpg[/img]


              Killed by CLRs since 2004. WOOT!
              Support Cainslair. Donate here! [url]http://www.cainslair.org/billspaypal.php?[/url]

              Comment


                #8
                Originally posted by juneau View Post
                Homeplugs.
                how dare you suggest such a method, know those things cause to much RF interference they should be banned, but because they passed a draft standard, and they dont stand up to the full one, there is little in the way ofcom will do about them.

                Ask any Radio Amateur who lives next door to someone using these things, or even BTVision...

                I drive up the high street here and I can tell what houses have BTVision just passing them, the 2way Radio in my car goes nuts!




                I'm not insane. I'm just overwhelming!

                ·····••••• Support Cainslair. Donate here!•••••·····
                ·····••••• and get extra options! •••••·····

                Comment


                  #9
                  The ones in the US cannot have that kinda of output interference. It would never get FCC approval with an emanation like that.
                  [IMG]http://thepebkac.net/images/sigs/Outdoors_sig.jpg[/IMG]
                  Like the community? Donate here:
                  [URL="http://www.cainslair.com/misc.php?do=donate"]http://www.cainslair.com/misc.php?do=donate[/URL]

                  Comment

                  Cain's Lair Forums Statistics

                  Collapse

                  Topics: 26,182   Posts: 269,814   Members: 6,178   Active Members: 4
                  Welcome to our newest member, joky12.

                  Today's Birthdays

                  Collapse

                  Top Active Users

                  Collapse

                  There are no top active users.
                  widgetinstance 184 (More Posts) skipped due to lack of content & hide_module_if_empty option.
                  Working...
                  X